Hot water cylinder wrap (blanket)

hot_water_cylinder_wrapPlace your hand on your hot water cylinder

Is it warm? That only means one thing, you are wasting energy and wasting cash! Even if you are not using hot water, your storage hot water cylinder has a considerable storage heat loss.

Every time the water cools down below 60 degrees your element is programmed to switch on. On average even if you don’t use hot water, this may happen every hour.

The good news is..

you can do something about it!

Your solution is called a “Hot water cylinder wrap” or storage cylinder blanket. Once installed you will notice the difference on your power bill immediately.

Get your hot water cylinder wrapped up for as low as 249 + GST. Including installation and materials, we will even throw in 1 meter of insulation onto your hot water pipe so save more energy.

The wrap in made here in New Zealand and complies with AS/NZS 4859.1. With a total surface area of 5.6 sqm we are able to insulate any hot water cylinder from 135L to 180L. A minor additional cost may apply on larger style hot water cylinders. Wrap has a mean thickness of 60mm and declared thermal resistance of 1.3sqm C/W. After installation allow for 24 hours to achieve nominal stabilised thickness and; R-value .

Some advantages:

  • Keeps water hot longer.
  • Permanently fire retardant.
  • Contains up to 80% recycled glass.
  • Reduces energy costs.

Get your Electric hot water cylinder wrap today and start saving energy and money today. Call us on 0800 4 Cylinders to get your installation booked in today,

You can also book online HERE

conditions on price may apply.