zoom

Rinnai Infinity HD200 External Instantaneous Gas Hot Water Heater

Manufacturer: Rinnai

View products for this manufacturer

Product Code: 1305180

DOWNLOAD PRODUCT GUIDE:
Rinnai_continuous_flow_spec_guide.pdf

Price:
$2,150.00 (incl. GST)

Rinnai Infinity HD200 External Instantaneous Gas Hot Water Heater (Available in LPG and Natural Gas)

FREE CALL 0800 429 546

Free delivery for Auckland metropolitan locations*

We will deliver to any household throughout New Zealand. Contact us in advance for delivery and an installation quote

 

*Rural delivery fee may apply **Please note that all prices exclude GST**

 

Suitable for

• Commercial and domestic external applications
• Applications requiring higher hot water temperatures, can be set up to 85 °C
• Hard water areas (such as Wanganui)
• Mains and low pressure systems

Gas type
Available for Natural Gas or LPG. Specify gas type at time of purchase.

Colour: Silver
Input: 199 MJ/h or  55 kW
Output: 45.9 kW
Efficiency: 82%
Energy Star Rating: 5.6 stars
Capacity Hot water capacity: 2.4 to 30 litres per minute
Nominal water capacity: 26 litres per minute at a 25 °C rise (1560 L/h)
Nominal water capacity: 16.4 litres per minute at a 40 °C rise (984 L/h)
Connections Hot water oulet: R¾ (20 mm)
Cold water inlet: R¾ (20 mm)
Gas supply: R¾ (20 mm)
Exhaust System Forced flue
Ignition System Direct electronic ignition
Injector Size NG: 1.25, 1.95,   LPG: 0.75, 1.15
Ingress Protection Rating IPX4
Line Pressure (min.) NG: 1.0 kPa, LPG: 2.0 kPa
Line Pressure (max.)

3.5 kPa (maximum standing pressure under abnormal intermittent conditions is 5.0 kPa).

In the case of commercial metering (i.e. 35-37 kPa coming in), there may be a requirement to regulate the incoming line pressure down.

Noise Level 50 dB(A)
NOx af less than 60 ppm
Power Consumption  Normal: 48 W (NG) and 60 W (LPG), Standby: 2 W, Automatic Frost Protection: 100 W
Safety Devices  Flame failure, boil-dry protection, overheat protection (OHS), fusible link, pressure relief valve, combustion fan rpm check
Water Supply Nominal operating pressure: 130-1000 kPa
Minimum water flow: 2.4 litres per minute
Weight 21 kg

 

Suitable for

• Commercial and domestic external applications
• Applications requiring higher hot water temperatures, can be set up to 85 °C
• Hard water areas (such as Wanganui)
• Mains and low pressure systems
• Solar installations as a gas boost

Gas type
Available for Natural Gas or LPG. Specify gas type at time of purchase.

Basic clearances
The following diagram has been provided to assist you in determining where (and if) an external continuous flow water heater can be positioned. If in doubt, prior to purchase, consult a licensed gasfitter.

 

Customer Reviews

This product hasn't been reviewed yet. Write a review
pro-banner1

MAINS PRESSURE CYLINDERS

View Specials →
pro-banner2

LOW PRESSURE CYLINDERS

View Specials →
pro-banner3

GAS WATER HEATING

View Specials →