zoom

Rinnai Infinity VT26 External Instantaneous Gas Hot Water Heater

Manufacturer: Rinnai

View products for this manufacturer

Product Code: 1303030

Price:
$1,550.00
$1,295.00

Rinnai Infinity VT26 External Instantaneous Gas Hot Water Heater

FREE CALL 0800 429 546

Free delivery for Auckland metropolitan locations*

We will deliver to any household throughout New Zealand. Contact us in advance for delivery and an installation quote

 

*Rural delivery fee may apply **Please note that all prices exclude GST**

 

Suitable for:
• external domestic applications
• high simultaneous hot water demand applications (homes with 1-2 bathrooms)
• mains and low pressure systems

Hard or acidic water will need to be treated to use this product.

Gas type
Available for Natural Gas or LPG. Specify gas type at time of purchase.

Colour: White
Input: 199 MJ/h or 55 kW
Output: 44.6 kW
Efficiency: 80%
Energy Star Rating: 5.1 stars
Factory Preset Temperature: 55 °C

 

Capacity Hot water capacity: 1.8 to 26 litres per minute
Nominal water capacity: 26 litres per minute at a 25 °C rise (1560 L/h)
Connections Hot water outlet: R¾ (20 mm)
Cold water inlet: R¾ (20 mm)
Gas supply: R¾ (20 mm)
Exhaust System Forced flue
Ignition System Direct electronic ignition
Injector Size NG: 1.0, 1.55
LPG: 0.7, 1.05
Line Pressure (min.) NG: 1.13 kPa, LPG 2.75 kPa
Line Pressure (max.) 3.5 kPa (maximum standing pressure under abnormal intermittent conditions is 5.0 kPa).

In the case of commercial metering, (i.e. 35-37 kPa coming in), there may be a requirement to regulate the incoming pressure down).
Power Consumption Normal: 54 W (NG), 59 W (LPG), Standby: 2 W, Automatic Frost Protection: 125 W
Pressure Relief Valve opens at 2060 kPa, valve closes at 1479 kPa
Noise Level 50 dB(A)
NOx af Less than 60 ppm
Safety Devices Flame failure, boil-dry protection, overheat protection, fusible link, pressure relief valve and combustion fan rpm check
Water Supply Nominal operating pressure: 130-1000 kPa
Activation flow rate: 2.4 litres per minute
Weight 17 kg

 

Suitable for:
• external domestic applications
• high simultaneous hot water demand applications (homes with 1-2 bathrooms)
• mains and low pressure systems

Hard or acidic water will need to be treated to use this product.

Gas type
Available for Natural Gas or LPG. Specify gas type at time of purchase.

General clearances
The following diagram has been provided to assist you in determining where (and if) an external continuous flow water heater can be positioned. If in doubt, prior to purchase, consult a licensed gasfitter.

 

gas_savings

 

Customer Reviews

This product hasn't been reviewed yet. Write a review
pro-banner1

MAINS PRESSURE CYLINDERS

View Specials →
pro-banner2

LOW PRESSURE CYLINDERS

View Specials →
pro-banner3

GAS WATER HEATING

View Specials →