zoom

HEATPUMP RETROFIT SAVE UP TO 75% ON POWER

Manufacturer: Econergy

View products for this manufacturer

Product Code: HEAM4IQ680

DOWNLOAD MORE INFORMATION:
Econergy_SalesBrochure_2012.pdf

Price:
$4,990.00 (incl. GST)

RETRO FIT YOUR EXISTING HOT WATER CYLINDER WITH AN ECONERGY HEATPUMP AND SAVE UP TO 75%!

As recommened by Consumer New Zealand >>

http://www.consumer.org.nz/reports/heat-pump-water-heaters/we-recommend

Why install an Econergy® Heat Pump Water Heater ?

We all like a decent shower or soak in a hot bath...until the power bill arrives. Electric water heating accounts for 34% of household
electricity use... and energy costs continue to rise. Extremely ecient, Econergy® water heaters solve the problem of rising energy costs
by transfering up to 75% of the heating energy from the air.* This is achieved by application of revolutionary patented technology that
heats the water in a single pass. Econergy® running costs have been independently shown to be amongst the lowest of any system
available.

* HP4000LT, 73.8% annual savings compared with electric hot water cylinder, Zone 5, Project Solar AS/NZS 5125/4234
Econergy® Heat Pump Water Heaters are available in two convenient sizes designed to cover the range of hot water needs of New
Zealand homes. Our Consumer-tested HP4000LT is designed with the larger home in mind and it’s smaller companion the HP3000LT
will naturally suit smaller homes. Each unit has a sealed refrigerant circuit, built in circulator and is simply connected to an existing
hot water cylinder or Econergy® Heat Pump ready cylinder via insulated water pipes.
The Econergy® heat pump water heater is intelligently controlled via a microprocessor located in the
unit ensuring the most ecient operation under all conditions.
Each Econergy® system is supplied with a simple user interface, with the following features:

• Indicates running status of the heat pump unit.
• Keeps customer informed if the backup element has been energized automatically.
• Allows manual changeover between the heat pump and the electric element.

The Econergy® system can be mounted exibly to suit the house design and layout. The hot water cylinder may be mounted
internally or externally. The Econergy® heat pump unit may be mounted external to the building envelope, or if integrated, in the
ceiling cavity. Econergy® recommends indoor mounting of hot water cylinders wherever possible to reduce heat losses from the
cylinder and allow proximity to point of use. Outdoor hot water cylinders available on request.

SAVINGS CHART

Customer Reviews

This product hasn't been reviewed yet. Write a review
pro-banner1

MAINS PRESSURE CYLINDERS

View Specials →
pro-banner2

LOW PRESSURE CYLINDERS

View Specials →
pro-banner3

GAS WATER HEATING

View Specials →