Category: Special Deals

Posted on by

Continuous flow hot water systems prices

With gas prices down, its time to upgrade to a continuous flow hot water heater!

To make it even more compelling we are now offering a fixed system price to upgrade from electric storage to continuous flow LPG or natural gas with everything included.

CURRENT GAS HOT WATER CONTINUOUS FLOW SYSTEM PRICING FOR NG AND LPG GAS

continuous_water_heating_natural_gas$2,800.00 incl. GST and installation natural gas

This installation includes everything you need to convert from your current hot water storage to continuous flow hot water.

We will supply and install a Rheem 27 continuous flow appliance in an approved location and certify the installation as required. This includes a connection to an existing natural gas meter. Whether you currently have low or mains pressure this is full supply and install price which includes everything you need to get into that endless hot shower you have been craving!

continuous_flow_hot_water_systems$3,049.00 incl. GST and installation LPG

Similar to the above, this installation is designed to accommodate a LPG installation when natural gas supply is not possible/available or too expensive.

Available with a 27 Bosch or Rheem continuous flow heater. All connections and supply of pavers also included

lpg_bottlesTo make this deal even more attractive, we will throw in 1 free bottle of LPG at a value of $150!

The installation includes all required components required to replace your existing low or mains pressure hot water cylinder. Commonly a site visit is required to ensure that placement complies with the relevant standards and safety requirements.

Ongoing gas pricing may vary but is currently trending at $80-$120 per bottle depending on your supplier. If in doubt, please ask our team about current rates prior to ordering.

Rheem_continuous_flowAll continuous flow hot water heaters included in the above deals require an electrical connection for ignition (we also offer self igniting hydro powered continuous flow heaters on request). We can offer the electrical connection at a fixed price of $350 + GST. Alternatively you are free to organise an electrician of your choice to be onsite on the day of the installation.

All installations are installed by qualified gasfitters and plumbers and come with a full Master Plumbers warranty.

We WONT be beaten on price so make sure you are quoted apples for apples. In any case claim your $50 if you do!

Posted on by

Hot water cylinder wrap (blanket)

hot_water_cylinder_wrapPlace your hand on your hot water cylinder…

Is it warm? That only means one thing, you are wasting energy and wasting cash! Even if you are not using hot water, your storage hot water cylinder has a considerable storage heat loss.

Every time the water cools down below 60 degrees your element is programmed to switch on. On average even if you don’t use hot water, this may happen every hour.

The good news is..

you can do something about it!

Your solution is called a “Hot water cylinder wrap” or storage cylinder blanket. Once installed you will notice the difference on your power bill immediately.

Get your hot water cylinder wrapped up for as low as 249 + GST. Including installation and materials, we will even throw in 1 meter of insulation onto your hot water pipe so save more energy.

The wrap in made here in New Zealand and complies with AS/NZS 4859.1. With a total surface area of 5.6 sqm we are able to insulate any hot water cylinder from 135L to 180L. A minor additional cost may apply on larger style hot water cylinders. Wrap has a mean thickness of 60mm and declared thermal resistance of 1.3sqm C/W. After installation allow for 24 hours to achieve nominal stabilised thickness and; R-value .

Some advantages:

  • Keeps water hot longer.
  • Permanently fire retardant.
  • Contains up to 80% recycled glass.
  • Reduces energy costs.

Get your Electric hot water cylinder wrap today and start saving energy and money today. Call us on 0800 4 Cylinders to get your installation booked in today,

You can also book online HERE

conditions on price may apply.

Posted on by

Rheem Alpha low pressure made in 1967

Rheem_AlphaHard to believe but we got called to this 48 year old Rheem Alpha hot water cylinder because a mains pressure upgrade was requested and not because it was leaking!

A typical low pressure installation with a vacuum relief valve and 15mm hot water feed to the house. No Seismic restraint or tray despite there being another property underneath. Safe-trays are a required by law in Australia but not in New Zealand if the property affected is not a separate title. We from Hot Water Cylinder NZ still believe this is good practice, ensuring that if and when a leak occurs the water can be managed and drained preventing damage to your own and others property. We are currently offering a FREE CYLINDER TRAY with every mains pressure upgrade! Call us for more info.