Product Description
Rinnai Infinity EF26 Condensing xternal Instantaneous Gas Hot Water Heater
The Rinnai EF26 is a condensing gas continuous flow hot water heater which captures waste heat from the flue gas, through the use of a secondary heat exchanger, to help heat the water with less energy.
Uses 11% less energy than the Rinnai INFINITY A26
FREE CALL 0800 429 546
Free delivery for Auckland metropolitan locations*
We will deliver to any household throughout New Zealand. Contact us in advance for delivery and an installation quote
*Rural delivery fee may apply **Please note that all prices exclude GST**
Suitable for:
• external domestic applications
• high simultaneous hot water demand applications (homes with 1-2 bathrooms)
• mains and medium pressure systems
Hard or acidic water will need to be treated to use this product.
Gas type
Available for Natural Gas or LPG. Specify gas type at time of purchase.
Colour: | White |
Input: | 175 MJ/h |
Output: | 44.5 kW |
Efficiency: | 80% |
Energy Star Rating: | 5.1 stars |
Factory Preset Temperature: | 55 °C |
Capacity | Hot water capacity: 26 litres per minute Nominal water capacity: 26 litres per minute at a 25 °C rise (1560 L/h) |
Connections | Hot water outlet: R¾ (20 mm) Cold water inlet: R¾ (20 mm) Gas supply: R¾ (20 mm) |
Exhaust System | Forced flue |
Ignition System | Direct electronic ignition |
Injector Size | NG: 1.0, 1.55 LPG: 0.7, 1.05 |
Line Pressure (min.) | NG: 1.13 kPa, LPG 2.75 kPa |
Line Pressure (max.) | 3.5 kPa (maximum standing pressure under abnormal intermittent conditions is 5.0 kPa).
In the case of commercial metering, (i.e. 35-37 kPa coming in), there may be a requirement to regulate the incoming pressure down). |
Power Consumption | Normal: 63 W, Standby: 2 W, Automatic Frost Protection: 92 W |
Pressure Relief | Valve opens at 2060 kPa, valve closes at 1479 kPa |
Noise Level | 50 dB(A) |
NOx af | Less than 60 ppm |
Safety Devices | Flame failure, boil-dry protection, overheat protection, fusible link, pressure relief valve and combustion fan rpm check |
Water Supply | Nominal operating pressure: 220-1000 kPa Activation flow rate: 1.5 litres per minute |
Weight | 18 kg |
Suitable for:
• external domestic applications
• high simultaneous hot water demand applications (homes with 1-2 bathrooms)
• mains and low pressure systems
Hard or acidic water will need to be treated to use this product.
Gas type
Available for Natural Gas or LPG. Specify gas type at time of purchase.
General clearances
The following diagram has been provided to assist you in determining where (and if) an external continuous flow water heater can be positioned. If in doubt, prior to purchase, consult a licensed gasfitter.